My LEGO Nexus Organization

And this is the first in my three-part MOC series. The legendary Master Sword!

However... The Master Sword had been broken in an alternate Timeline that takes place around the end of the Ocarina of Time. So needless to say, when it was used to fight Ganon again, the hero was easily defeated and broken again... But not anymore. It's been restored, and even enhanced! This contains traces of the other upgrades the Master Sword can get throughout the series, like the Tempered Sword and Golden Sword, and even other swords.

This is the Master Sword's front. (http://www.brickshelf.com/gallery/NeoBlademanSC/General-MOCs/master_sword_front.png)

This is the back of the Master Sword. (http://www.brickshelf.com/gallery/NeoBlademanSC/General-MOCs/master_sword_back.png)

This is the part that got cut off of the front when i took the pic. (http://www.brickshelf.com/gallery/NeoBlademanSC/General-MOCs/master_sword_bottom.png)

This is the side of the Master Sword. (http://www.brickshelf.com/gallery/NeoBlademanSC/General-MOCs/master_sword_side.png)

I didn't include the Triforce Mark, I know, but there's not much you can do 'bout that.

So what do you guys think? C&C welcome!

Wow! That is impressive! Nicely done! Only question is why you left the end blunt and not pointed?

The end of the blade? That'd be because of the way I made the inside of the blade. See, I put a 'core' of other bricks in it, so that I didn't have to use up all my bricks just to create it. And it may also be the angle, as I notice now... There is a tip, but because I had it on an angle so it crash down on me, the brick one stud up looks like it's part of the tip itself. ;)

Oh! I see it now! Well all in all its a pretty Sweet creation!

Thanks, Oil. =) The Ocarina of Time is up now as well, and the third should be up soon.

Cool! I will go look at it now! Hey one other thing...what are the demensions of the sword? Looks pretty acurate to life size....

Hmm... I'd say it is life-size, or just about, but I don't know the exact dimensions.

Very very cool!

Height/length: The sword's length is just over 2 ft, or almost 25/26 inches(I think I remember it being almost 25 inches). And the width from wing to wing is like just over inches, and the height(Three bricks high) is just over 1 inch.

Can it hold up to breaking: I've held it by the handle a few times now without it breaking(Yay for my thought to build it sideways instead of up. ... I lost a few good Master Swords that way when I was younger. =P), but I don't know how many times it'd hold up to slashing, or hitting an object, even if it's soft... 'Broke' the blade by slashing at my bed a few times when it was shorter. 'course, it was a simple matter of the bricks coming off. =P But I have reinforced the inside, which is partly why I've taken so long. =P

The above is from my answers in CTAM. ;)

The stuff kids dream of, Blade..nicely done.

Thanks much MsRR =) Drained most of my bricks, but it's definitely huge. =)

Niiiiiiiiiiiiiiice, how long is it in studs?

Hmm... Lemme go count. BRB with an EDIT.

/EDIT: Length is 79. One short of 80. xD Still have to count the width.

//EDIT: Width is 20. 1 away from an even 100 combined. xD

Interesting, not a SHIP then.

A ship? =P But that just shows how long it is. Definitely not a dagger. =P

SHIP: Seriously Huge Investment in Parts

Still great!

Lemme see, 79 studs... Some two and a half 32x32s...

No, not yet. Too many things I could break in my room. =P

Besides, never bring a sword to anime-style power fight...

Raks: No, bring a Chainblade. =P